CH3000 Series Hydrogen Purifier

CH3000 series hydrogen purifiers are mainly used in production and scientific research in electronics, semiconductors, metallurgy, machinery, optical fiber, atomic energy, analysis, bioengineering and other departments.This series of hydrogen purifiers are mainly used in the production of high-purity materials, such as high-purity tellurium, cadmium, zinc, copper, silicon, germanium, etc.; they can also be used in the reducing atmosphere of the heat treatment process of metal materials and mechanical parts.

Purification Principle

This series of purifiers uses the principle that hydrogen and oxygen react to generate water under the action of a catalyst to remove the impurity oxygen in the hydrogen, and then uses an adsorbent to adsorb and remove impurities such as H2O and CO2 in the hydrogen, thereby obtaining high-purity hydrogen.

Technical parameters of hydrogen purifier

Requirements for raw hydrogen

Generally, it is bottled pure hydrogen, liquid hydrogen, and well-controlled pipeline hydrogen.

Impurity requirements: O2≤500PPm, H2O≤500PPm.

Output pure gas

Purity: 99.9999%

Impurity content:

O2≤0.1PPm,

H2O≤0.5PPm (i.e. dew point≤-80℃),

CO+CO2≤0.1PPm,

The oxides of S and P are ≤0.1PPm.

The number of dust particles (≥0.3μm) is 3-5 per liter.

Working pressure: 0.1-1.0MPa.

Gas processing volume: 4NM3/h.

Equipment size: 360mm×560mm×1000mm

Equipment Features

1)  The requirements for raw hydrogen are not high, and the impurity oxygen content is allowed to be as high as 500ppm;

2)  The catalyst of this purifier is highly active and the adsorbent capacity is large. Therefore, users can choose cheap industrial hydrogen as the gas source to meet the requirements and also reduce production costs.

3)  This purifier is of catalytic regeneration type and can be used for a long time through repeated regeneration after failure.

4)  This machine has a double structure, one group is working and the other can be regenerated as standby, and the working and regeneration can be carried out at the same time, so it can continuously supply air for a long time, that is, one unit can replace two single-type purifiers.

5)  JRH-4Q adopts touch screen, and pressure, temperature, etc. are detected online. The working and regeneration cycles of this system can be adjusted according to the actual usage of the user, which is beneficial to saving gas source.

6)  JRH-4Q has an automatic switching function for working and regeneration, which does not require manual operation. Its performance is more stable and reliable, avoiding contamination to the system caused by users misoperation.

7)  The equipment has built-in alarm systems for over-temperature, over-pressure, cylinder under-pressure, valve failure, etc. to ensure the safety and reliability of the equipment.

8)  When the system is working normally, if the mains power is suddenly cut off or the operator fails to shut down the machine normally, the equipment will automatically start the backup power supply and close all programs to ensure normal use of the equipment next time.

9)  The gas circuit is explosion-proof for solenoid valves (the electrical appliances can be customized for explosion-proof)